Print Back

Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.

    On request:
    Special versions and spacer rings.

    (Kipp Original Design)
  • Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    Unit of Measure
    Items Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    M65547
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    M65491
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    M65495
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    M65513
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    M65530
    Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
    Material N/A Steel
    Style N/A E
    L N/A 24.00 mm N/A 32.00 mm N/A 37.00 mm N/A 42.00 mm N/A 56.00 mm
    D N/A 3.00 mm N/A 4.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm
    H N/A 3.50 mm N/A 4.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm
    L2 N/A 5.00 mm N/A 6.00 mm N/A 7.00 mm N/A 8.00 mm N/A 10.00 mm
    L3 N/A 3.50 mm N/A 7.00 mm N/A 8.00 mm N/A 8.00 mm N/A 12.00 mm
    L1 N/A 12.00 mm N/A 15.00 mm N/A 17.00 mm N/A 20.00 mm N/A 26.00 mm
    D1 N/A 1/4-28 in N/A 5/16-24 in N/A 3/8-24 in N/A 1/2-13 in N/A 5/8-11 in
    F x 30° N/A 0.80 mm N/A 1.00 mm N/A 1.30 mm N/A 1.80 mm N/A 2.30 mm
    F1 - Spring Force Initial Pressure N/A 5 N N/A 6 N N/A 5 N N/A 6 N N/A 15 N
    F2 - Spring Force Final Pressure N/A 9 N N/A 12 N N/A 12 N N/A 14 N N/A 35 N
    L4 N/A 10.00 mm N/A 13.00 mm N/A 15.00 mm N/A 17.00 mm N/A 23.00 mm
    SW1 N/A 8.00 mm N/A 10.00 mm N/A 13.00 mm N/A 14.00 mm N/A 19.00 mm
    SW2 N/A
    D2 N/A M2 mm N/A M3 mm N/A M 4 mm N/A M 6 mm N/A M 8 mm
    End Pressure Initial-Final N/A
    Diameter N/A
    Stud Length N/A