Print Back
Material:
• Steel version, locking pin hardened:  quality class 5.8
• Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
• Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite grey thermoplastic

Surface finish:
• Steel version, locking pin hardened:  black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened: natural finish, locking pin ground
• Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

On request:
Special versions and spacer rings.

All SS Plunger Indexing Plungers - Locking Pin Hardened - Metric
All SS Plunger Indexing Plungers - Locking Pin Hardened - Metric
Unit of Measure
Items All SS Plunger Indexing Plungers - Locking Pin Hardened - Metric
M64985
All SS Plunger Indexing Plungers
All SS Plunger Indexing Plungers - Locking Pin Hardened - Metric
M64969
All SS Plunger Indexing Plungers
All SS Plunger Indexing Plungers - Locking Pin Hardened - Metric
M64973
All SS Plunger Indexing Plungers
All SS Plunger Indexing Plungers - Locking Pin Hardened - Metric
M64975
All SS Plunger Indexing Plungers
All SS Plunger Indexing Plungers - Locking Pin Hardened - Metric
M64977
All SS Plunger Indexing Plungers
Style N/A A
L N/A 35.00 mm N/A 43.00 mm N/A 50.00 mm N/A 59.00 mm N/A 77.00 mm
D N/A 3.00 mm N/A 4.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm
H N/A 3.50 mm N/A 4.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm
D2 N/A 14.00 mm N/A 18.00 mm N/A 21.00 mm N/A 25.00 mm N/A 33.00 mm
L2 N/A 5.00 mm N/A 6.00 mm N/A 7.00 mm N/A 8.00 mm N/A 10.00 mm
L3 N/A 10.00 mm N/A 13.00 mm N/A 15.00 mm N/A 17.00 mm N/A 23.00 mm
L1 N/A 12.00 mm N/A 15.00 mm N/A 17.00 mm N/A 20.00 mm N/A 26.00 mm
D1 N/A M6 X 0.75 mm N/A M8 X 1.00 mm N/A M10 X 1.00 mm N/A M12 X 1.50 mm N/A M16 X 1.50 mm
F x 30° N/A 0.80 mm N/A 1.00 mm N/A 1.30 mm N/A 1.80 mm N/A 2.30 mm
F1 - Spring Force Initial Pressure N/A 4.5 N N/A 6 N N/A 5 N N/A 6 N N/A 15 N
F2 - Spring Force Final Pressure N/A 9 N N/A 12 N N/A 12 N N/A 14 N N/A 35 N
L4 N/A
SW1 N/A 8.00 mm N/A 10.00 mm N/A 13.00 mm N/A 14.00 mm N/A 19.00 mm
SW2 N/A
End Pressure Initial-Final N/A