Print Back

Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

    (Kipp Original Design)
  • Indexing Plunger Short Version - Locking Pin Hardened - Metric
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    Unit of Measure
    Items Indexing Plunger Short Version - Locking Pin Hardened - Metric
    M65291
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    M65293
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    M65295
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    M65297
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    M65299
    Indexing Plunger Short Version - Locking Pin Hardened - Metric
    Material N/A Steel
    Style N/A A
    L N/A 30 mm N/A 35.00 mm N/A 42.00 mm N/A 54.00 mm N/A 61.00 mm
    D N/A 4.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm N/A 10.00 mm
    H N/A 4.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm N/A 10 mm
    D2 N/A 18.00 mm N/A 21.00 mm N/A 25.00 mm N/A 33.00 mm N/A 33.00 mm
    L2 N/A 6.00 mm N/A 7.00 mm N/A 8.00 mm N/A 10.00 mm N/A 12.00 mm
    L1 N/A 6.00 mm N/A 8.00 mm N/A 10.00 mm N/A 12.00 mm N/A 15.00 mm
    D1 N/A M8 X 1.00 mm N/A M10 X 1.00 mm N/A M12 X 1.50 mm N/A M16 X 1.50 mm N/A M20 X 1.50 mm
    F x 30° N/A 1.00 mm N/A 1.30 mm N/A 1.80 mm N/A 2.30 mm N/A 2.80 mm
    F1 - Spring Force Initial Pressure N/A 6 N N/A 5 N N/A 6 N N/A 14 N N/A 15 N
    F2 - Spring Force Final Pressure N/A 12 N N/A 12 N N/A 14 N N/A 28 N N/A 32 N
    SW1 N/A 10.00 mm N/A 13.00 mm N/A 14.00 mm N/A 19.00 mm N/A 22.00 mm
    SW2 N/A
    End Pressure Initial-Final N/A