Print Back

Overlap wave spring washers provide medium loads in a small axial space. This series has ends that overlap, in other words the two ends of the material strip lay on top of each other. This open construction with some overlap allows the ends to move during compression, which if constrained in a bore prevents binding.

Standard parts are available in stainless steel & carbon steel. Common applications for this type of parts is adjacent to smaller bearings, where shaft take up or thermal expansion & contraction accommodation is required. The overlap is advantageous for such applications where the bore is made of softer material than the spring and the material thickness of the spring is relatively small.

Wave Washer with Overlap
Wave Washer with Overlap
Unit of Measure
Items Wave Washer with Overlap
M006200010
Wave Washer with Overlap
Wave Washer with Overlap
M007501014
Wave Washer with Overlap
Wave Washer with Overlap
M008701016
Wave Washer with Overlap
Wave Washer with Overlap
M010001018
Wave Washer with Overlap
Wave Washer with Overlap
M011201020
Wave Washer with Overlap
Weight N/A 0.000867 Pound N/A 0.001040 Pound N/A 0.001456 Pound N/A 0.001664 Pound N/A 0.002496 Pound
Material N/A High Carbon, C 1060-1075 / SWRH72A
Height N/A 0.625 Inch N/A 0.750 Inch N/A 0.875 Inch N/A 1.000 Inch N/A 1.125 Inch
Depth N/A 0.095 Inch N/A 0.160 Inch N/A 0.130 Inch N/A 0.160 Inch N/A 0.130 Inch
Width N/A 0.095 Inch N/A 0.160 Inch N/A 0.130 Inch N/A 0.160 Inch N/A 0.130 Inch
Minimum ID (In.) N/A 0.480 Inch N/A 0.500 Inch N/A 0.620 Inch N/A 0.780 Inch N/A 0.840 Inch
Maximum OD (In.) N/A 0.625 Inch N/A 0.750 Inch N/A 0.875 Inch N/A 1.000 Inch N/A 1.125 Inch
Thickness (In.) N/A 0.010 Inch N/A 0.010 Inch N/A 0.012 Inch N/A 0.012 Inch N/A 0.016 Inch
Free Height (Approx) (In.) N/A 0.095 Inch N/A 0.160 Inch N/A 0.130 Inch N/A 0.160 Inch N/A 0.130 Inch
Loaded Height (In.) N/A 0.050 Inch N/A 0.062 Inch N/A 0.062 Inch N/A 0.062 Inch N/A 0.078 Inch
# of Waves N/A 3