Material:
• Steel version, locking pin hardened:  quality class 5.8
• Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
• Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite grey thermoplastic

Surface finish:
• Steel version, locking pin hardened:  black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened: natural finish, locking pin ground
• Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

On request:
Special versions and spacer rings.

Unit of Measure

Style

C

D

8.00 mm

H

8.00 mm

D2

33.00 mm

L2

10.00 mm

L3

23.00 mm

L1

26.00 mm

D1

5/8-11 in

F x 30°

2.30 mm

F1 - Spring Force Initial Pressure

15 N

F2 - Spring Force Final Pressure

35 N

L4

68.00 mm

SW1

19.00 mm

Country of Origin

-

Product Guides

Plungers & Pins Guide

Why OneMonroe?

VMI - Custom Manufacturing - Technical Guides - Quality - Company Overview

Attribute Information

Indexing Plungers

Warning

Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.