Indexing Plunger W/Pull Knob - Locking Pin Hardened - Stainless Steel - Metric
Kipp - Pins
Steel version, locking pin hardened:
quality class 5.8
Stainless steel version, locking pin hardened:
threaded sleeve 1.4305
locking pin 1.4034
Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305
locking pin 1.4305
Steel version, locking pin hardened:
black oxide finish, locking pin ground
Stainless steel version, locking pin hardened:
natural finish, locking pin ground
Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
1 2
Item # |
IntegrationID |
Material |
Style |
L |
D |
H |
D2 |
L2 |
L3 |
L1 |
D1 |
F x 30° |
SW1 |
SW2 |
Diameter |
Stud Length |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M64947 |
IntegrationID
N/A 77907 |
Material N/A Stainless Steel | Style N/A D | L N/A 39.00 mm | D N/A 4.00 mm | H N/A 4.00 mm | D2 N/A 18.00 mm | L2 N/A 6.00 mm | L3 N/A 13.00 mm | L1 N/A 15.00 mm | D1 N/A M8 X 1.00 mm | F x 30° N/A 1.00 mm | SW1 N/A 10.00 mm | SW2 N/A 13.00 mm | Diameter N/A | Stud Length N/A |
M64949 |
IntegrationID
N/A 77908 |
Material N/A Stainless Steel | Style N/A D | L N/A 44.00 mm | D N/A 5.00 mm | H N/A 5.00 mm | D2 N/A 21.00 mm | L2 N/A 7.00 mm | L3 N/A 15.00 mm | L1 N/A 17.00 mm | D1 N/A M10 X 1.00 mm | F x 30° N/A 1.30 mm | SW1 N/A 13.00 mm | SW2 N/A 17.00 mm | Diameter N/A | Stud Length N/A |
M64951 |
IntegrationID
N/A 77909 |
Material N/A Stainless Steel | Style N/A D | L N/A 52.00 mm | D N/A 6.00 mm | H N/A 6.00 mm | D2 N/A 25.00 mm | L2 N/A 8.00 mm | L3 N/A 17.00 mm | L1 N/A 20.00 mm | D1 N/A M12 X 1.50 mm | F x 30° N/A 1.80 mm | SW1 N/A 14.00 mm | SW2 N/A 19.00 mm | Diameter N/A | Stud Length N/A |
M64953 |
IntegrationID
N/A 77910 |
Material N/A Stainless Steel | Style N/A D | L N/A 68.00 mm | D N/A 8.00 mm | H N/A 8.00 mm | D2 N/A 33.00 mm | L2 N/A 10.00 mm | L3 N/A 23.00 mm | L1 N/A 26.00 mm | D1 N/A M16 X 1.50 mm | F x 30° N/A 2.30 mm | SW1 N/A 19.00 mm | SW2 N/A 24.00 mm | Diameter N/A | Stud Length N/A |
M64955 |
IntegrationID
N/A 77911 |
Material N/A Stainless Steel | Style N/A D | L N/A 74.00 mm | D N/A 10.00 mm | H N/A 10 mm | D2 N/A 33.00 mm | L2 N/A 12.00 mm | L3 N/A 25.00 mm | L1 N/A 28.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW1 N/A 22.00 mm | SW2 N/A 30.00 mm | Diameter N/A | Stud Length N/A |
M64957 |
IntegrationID
N/A 77912 |
Material N/A Stainless Steel | Style N/A D | L N/A 78.00 mm | D N/A 12.00 mm | H N/A 12 mm | D2 N/A 33.00 mm | L2 N/A 14.00 mm | L3 N/A 25.00 mm | L1 N/A 28.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW1 N/A 22.00 mm | SW2 N/A 30.00 mm | Diameter N/A | Stud Length N/A |
M64959 |
IntegrationID
N/A 77913 |
Material N/A Stainless Steel | Style N/A D | L N/A 96.00 mm | D N/A 16.00 mm | H N/A 16 mm | D2 N/A 40.00 mm | L2 N/A 18.00 mm | L3 N/A 28.00 mm | L1 N/A 32.00 mm | D1 N/A M24 X 2.00 mm | F x 30° N/A 3.20 mm | SW1 N/A 27.00 mm | SW2 N/A 36.00 mm | Diameter N/A | Stud Length N/A |
1 2