Locating Feet - Metric

Material:
Plate steel, damper plate PUR elastomere (Sylomer V12)

Surface finish:
Plate blue chromated; damper plate gray, fixed, cannot slip. Range of use from -30 °C to +70 °C

Note:
The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Locating Foot.

(Kipp Original Design)

Item #	IntegrationID	D	H	D2	D1	Load capacity (under pressure of 0.4 N/mm²)	H1 (under pressure of 0 / 0.4 / 0.6 N/mm²)	Max Load	Stud Length
M66801	N/A 78153	N/A 36.00 mm	N/A 15 mm	N/A 5.50 mm	N/A 31.00 mm	N/A 212 N	N/A 4 / 2.8 / 1.9 mm	N/A	N/A
M66802	N/A 78154	N/A 46.00 mm	N/A 17.00 mm	N/A 6.60 mm	N/A 41.00 mm	N/A 435 N	N/A 4 / 2.8 / 1.9 mm	N/A	N/A
M66803	N/A 78155	N/A 56.00 mm	N/A 19 mm	N/A 9.00 mm	N/A 50.00 mm	N/A 705 N	N/A 4 / 2.8 / 1.9 mm	N/A	N/A
M66804	N/A 78156	N/A 74.00 mm	N/A 21.00 mm	N/A 9.00 mm	N/A 68.00 mm	N/A 1372 N	N/A 4 / 2.8 / 1.9 mm	N/A	N/A

N/A
78153

N/A 36.00 mm

N/A 15 mm

N/A 5.50 mm

N/A 31.00 mm

N/A 212 N

N/A 4 / 2.8 / 1.9 mm

N/A

M66802

N/A
78154

N/A 46.00 mm

N/A 17.00 mm

N/A 6.60 mm

N/A 41.00 mm

N/A 435 N

N/A 4 / 2.8 / 1.9 mm

N/A

M66803

N/A
78155

N/A 56.00 mm

N/A 19 mm

N/A 9.00 mm

N/A 50.00 mm

N/A 705 N

N/A 4 / 2.8 / 1.9 mm

N/A

M66804

N/A
78156

N/A 74.00 mm

N/A 21.00 mm

N/A 9.00 mm

N/A 68.00 mm

N/A 1372 N

N/A 4 / 2.8 / 1.9 mm

N/A