CM Latches with Knob

High impact strength polyamide-based (PA) technopolymer. Resistant to solvents, oil, greases and other chemical agents. Black color with matte finish. AISI 303 stainless steel rotation pin.

Fitting by means of:

2 pairs of nickel-plated brass bushings with tapped hole

2 pairs of nickel-plated steel studs

2 pairs of through holes for countersunk head screws

2 pairs of through holes for cylindrical head screws

1 pair of nickel-plated brass bushings with tapped hole and 1 pair of nickel-plated steel studs

1 pair of nickel-plated brass bushings with tapped hole and 1 pair of through holes for countersunk head screws.

1 pair of nickel-plated brass bushings with tapped hole and 1 pair of through holes for cylindrical head screws

1 pair of nickel-plated steel studs and 1 pair of through holes for cylindrical head screws

1 pair of nickel-plated steel studs and 1 pair of through holes for countersunk head screws

Application example

Rotation angle: max 220°, between 0° and -40° and between 0° and 180° (0° = where the two interconnected surfaces are on the same plane).

Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance. Elesa Original Design.

Item #	IntegrationID	D	H	L2	L1	l	h	Diameter	Stud Length

421211	N/A 82619	N/A 1.18 in	N/A 1.26 in	N/A 0.79 in	N/A 0.79 in	N/A 0.63 in	N/A 0.59 in	N/A	N/A
421213	N/A 82620	N/A 1.18 in	N/A 1.400 in	N/A 0.98 in	N/A 0.79 in	N/A 0.63 in	N/A 0.59 in	N/A	N/A
421221	N/A 82621	N/A 1.42 in	N/A 1.26 in	N/A 0.98 in	N/A 0.98 in	N/A 0.63 in	N/A 0.91 in	N/A	N/A
421223	N/A 82622	N/A 1.42 in	N/A 1.400 in	N/A 1.18 in	N/A 0.98 in	N/A 0.63 in	N/A 0.91 in	N/A	N/A