High impact strength polyamide-based (PA) technopolymer. Resistant to solvents, oil, greases and other chemical agents. Black standard color with matte finish. AISI 303 stainless steel rotation pin.
Fitting by means of:
Rotation angle: max 210°, between 0° and -15° and between 0° and 195° (90° = where the two interconnected surfaces are at a right angle). Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance (see drawing). Elesa Registered Design.
Our CFB plastic hinges have a duroplast fold-down handle and is an ELESA Original Design.
Material - Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
Rotating pin - AISI 303 stainless steel.
Standard execution - Pass-through holes for M6 countersunk head screws and referring pins for an accurate positioning of the hinge body.
Assembly instructions - Remove the rotation pin and fit the two separated bodies of the hinge on the door and on the frame. Assembly the two elements together matching the right alignment of the hinge and insert the rotation pin.
CHARACTER
Material |
N/A Technopolymer |
Finish |
N/A Matte |
Color |
N/A Black |
d |
N/A 6.00 mm |
l2 |
N/A 27.00 mm |
Description Code |
N/A CFB.108 SH-6 |
Open Width - B |
N/A 45.00 mm |
b1 |
N/A 20.50 mm |
Center to Center (f ±0.25) |
N/A 72.50 mm |
Center to Center (f1 ±0.25) |
N/A 48.20 mm |
L - Length |
N/A 109.00 mm |
L1 |
N/A 18.00 mm |
Fitting - d2 |
N/A 6.00 mm |
Fitting - l |
N/A 10.00 mm |
Fitting - TSP |
N/A 6.50 mm |
Center to Center (f2 ±0.25) |
N/A
92.70 |
Country of Origin |
N/A - |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Hinge's Guides |
