Material:
-Steel quality class 5.8
Surface finish:
-Blue chromated
Note:
-Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions.
Finish |
N/A Steel Blue Chromate |
L |
N/A 54.00 in |
A |
N/A 19.00 in |
D |
N/A 5.00 in |
H |
N/A 12.00 in |
D2 |
N/A 3.00 in |
L2 |
N/A 15.00 in |
L3 |
N/A 24.00 in |
L1 |
N/A 27.00 in |
D1 |
N/A M8 mm |
F x 30° |
N/A 0.90 in |
F1 - Spring Force Initial Pressure |
N/A 3.5 N |
F2 - Spring Force Final Pressure |
N/A 13.5 N |
SW1 |
N/A 8.00 in |
Tightening Torque Max. |
N/A 4.5 nm |
Country of Origin |
N/A Can be sourced domestically |
Product Guides |
N/A Plungers & Pins Guide |
Attribute Information |
N/A Indexing Plungers |
Why OneMonroe? |
N/A VMI - Custom Manufacturing - Technical Guides - Quality - Company Overview |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
