SolaDeck Model 0786-41 (DC Combiner) 2 Position ground block UL STD 1741, CSA C22.2 No. 107.1-01

The SolaDeck UL 1741 SolaDeck Combiners/Enclosure models are most commonly used when combining strings of solar modules.

SolaDeck 0786-41 Details:
- 6" Slotted din rail installed
- ETL listed and labeled to the UL 1741 Standard
- Rated 600 volt 120 amps
- Combines strings Rail mounted fuse holders (sold separately)
- Rail mount terminal blocks (sold separately)
- Use 0784BB bus bar for fuse holders (sold separately)
- Use 0785BB bus bar for (1451) terminal blocks (sold separately)

SolaDeck is a PV wire enclosure and seamless flashed product all in one. SolaDeck eliminates the multiple parts and respective labor typically needed to accomplish the roof penetration for a weather-tight wiring passageway into the home.

Unique in the solar industry, SolaDeck is designed with a seamless flashing consistent with standard roofing practices for roof penetration. All SolaDeck models are third party tested by ETL to the UL50 Type 3R or UL1741 standards. NOTE: SolaDeck enclosures include din rail, ground blocks, and aluminum strain clip. Product image for reference, internal components sold separately and may vary depending on model - check out the SolaDeck components list below for more info.

All SolaDeck Enclosures Feature:
- 18 gauge galvanized steel Powder coated finish
- Seamless stamped construction
- Three roof deck knockouts (½"e;, ¾"e;, 1")
- Five center points for entry or exit
- Two or five position ground block
- Flashes in the roof system
- Mounting hardware included
- Listed to respective UL standards (UL50 Type 3R or UL1741)

Technical Documents:
Soladeck_Manual
SolaDeck Components List