High Impact - Threaded/Reamed - Inch

Made from phenolic based duroplast, these 5 lobe knobs are radiused and polished to provide maximum beauty and comfort

Insert material is available in brass, steel, or stainless steel

Insert is molded in allowing for a slight shoulder effect so the torque is taken up by the insert and not the plastic face

Elesa Original Design

Unit of Measure

Items	30150 High Impact - Threaded/Reamed - Inch	M-30151 High Impact - Threaded/Reamed - Inch	M-30160 High Impact - Threaded/Reamed - Inch	M-30161 High Impact - Threaded/Reamed - Inch	M-30162 High Impact - Threaded/Reamed - Inch
Type	N/A	N/A Reamed Knobs are provided with set screw hole 10-32 in brass & 1/4-20 in steel	N/A	N/A Reamed Knobs are provided with set screw hole 10-32 in brass & 1/4-20 in steel	N/A
Material	N/A Polypropylene
T - Ream	N/A	N/A 0.25 in	N/A	N/A 0.25 in	N/A
Mounting Type	N/A Tapped	N/A Reamed	N/A Tapped	N/A Reamed	N/A Tapped
T - Thread	N/A 1/4-20	N/A	N/A 1/4-20	N/A	N/A 5/16-18
H - Total Height	N/A 0.91 in	N/A 0.91 in	N/A 1.06 in	N/A 1.06 in	N/A 1.06 in
A - Diameter	N/A 1.26 in	N/A 1.26 in	N/A 1.57 in	N/A 1.57 in	N/A 1.57 in
B - Hub Diameter	N/A 0.59 in	N/A 0.59 in	N/A 0.67 in	N/A 0.67 in	N/A 0.67 in
D - Hub Projection (DS)	N/A 0.47 in	N/A 0.47 in	N/A 0.71 in	N/A 0.55 in	N/A 0.71 in
Knob Type	N/A Multi Lobed
Diameter	N/A 1.26 in (32 mm)	N/A 1.26 in (32 mm)	N/A 1.57 in (40 mm)	N/A 1.57 in (40 mm)	N/A 1.57 in (40 mm)
Stud Length	N/A
Alternate P/N	N/A	N/A 30151	N/A 30160	N/A 30161	N/A 30162