Lateral Spring Plunger - W/Seal - Metric

Material:
Body in aluminum; spring in steel; pressure pin in steel or in plastic

Surface finish:
Pressure pin (steel) surface hardened and galvanized; body blue galvanized

Note:
Lateral Spring Plungers aid in the positioning and clamping, holding and fastening of tools and parts during engraving, labelling, drilling, galling, threading, honing, grinding, welding, soldering, hard-facing, assembling, etc. In order to position, see 03330 for suitable eccentric bushes.

(Kipp Original Design)

Lateral Spring Plunger - No Seal - Metric

Unit of Measure

Items	M65796 Lateral Spring Plunger - W/Seal - Metric	M65797 Lateral Spring Plunger - W/Seal - Metric	M65798 Lateral Spring Plunger - W/Seal - Metric	M65799 Lateral Spring Plunger - W/Seal - Metric	M65800 Lateral Spring Plunger - W/Seal - Metric
L	N/A 4.00 mm	N/A 4.00 mm	N/A 4.00 mm	N/A 6.00 mm	N/A 6.00 mm
D	N/A 0.25 in	N/A 0.25 in	N/A 0.25 in	N/A 0.4375 in	N/A 0.4375 in
F	N/A 10.00 N	N/A 20.00 N	N/A 40.00 N	N/A 20.00 N	N/A 50.00 N
D2	N/A 0.25 in	N/A 0.25 in	N/A 0.25 in	N/A 0.4375 in	N/A 0.4375 in
L1	N/A 7.00 mm	N/A 7.00 mm	N/A 7.00 mm	N/A 12.00 mm	N/A 12.00 mm
D1	N/A 3.00 mm	N/A 3.00 mm	N/A 3.00 mm	N/A 5.00 mm	N/A 5.00 mm
±S	N/A 0.5 mm	N/A 0.5 mm	N/A 0.5 mm	N/A 0.8 mm	N/A 0.8 mm
X if Y = 1	N/A 0.8 mm	N/A 0.8 mm	N/A 0.8 mm	N/A	N/A
X if Y = 2	N/A 1 mm	N/A 1 mm	N/A 1 mm	N/A 1.5 mm	N/A 1.5 mm
X if Y = 3	N/A 1 mm	N/A 1 mm	N/A 1 mm	N/A 1.7 mm	N/A 1.7 mm
X if Y = 4,5	N/A 1 mm	N/A 1 mm	N/A 1 mm	N/A 1.7 mm	N/A 1.7 mm
X if Y = 6	N/A 1 mm	N/A 1 mm	N/A 1 mm	N/A 1.7 mm	N/A 1.7 mm
X if Y = 8	N/A 1 mm	N/A 1 mm	N/A 1 mm	N/A 1.7 mm	N/A 1.7 mm
End Pressure Initial-Final	N/A