Material:
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.
On request:
Special versions and spacer rings.
| Items |
 M65547 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric |
M65491 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric |
M65495 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric |
M65513 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric |
M65530 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric |
|||||
| Material | Steel | |||||||||
| Style | E | |||||||||
| L | 24.00 mm | 32.00 mm | 37.00 mm | 42.00 mm | 56.00 mm | |||||
| D | 3.00 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| H | 3.50 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| L2 | 5.00 mm | 6.00 mm | 7.00 mm | 8.00 mm | 10.00 mm | |||||
| L3 | 3.50 mm | 7.00 mm | 8.00 mm | 8.00 mm | 12.00 mm | |||||
| L1 | 12.00 mm | 15.00 mm | 17.00 mm | 20.00 mm | 26.00 mm | |||||
| D1 | 1/4-28 in | 5/16-24 in | 3/8-24 in | 1/2-13 in | 5/8-11 in | |||||
| F x 30° | 0.80 mm | 1.00 mm | 1.30 mm | 1.80 mm | 2.30 mm | |||||
| F1 - Spring Force Initial Pressure | 5 N | 6 N | 5 N | 6 N | 15 N | |||||
| F2 - Spring Force Final Pressure | 9 N | 12 N | 12 N | 14 N | 35 N | |||||
| L4 | 10.00 mm | 13.00 mm | 15.00 mm | 17.00 mm | 23.00 mm | |||||
| SW1 | 8.00 mm | 10.00 mm | 13.00 mm | 14.00 mm | 19.00 mm | |||||
| SW2 | ||||||||||
| D2 | M2 mm | M3 mm | M 4 mm | M 6 mm | M 8 mm | |||||
| End Pressure Initial-Final | ||||||||||
| Diameter | ||||||||||
| Stud Length | ||||||||||
|
|
||||||||||
