Surface finish:
• Steel version, locking pin hardened:
black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened:
natural finish, locking pin ground
• Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
| Items |
 M64986 All SS Plunger Indexing Plungers |
M64970 All SS Plunger Indexing Plungers |
M64974 All SS Plunger Indexing Plungers |
M64976 All SS Plunger Indexing Plungers |
M64978 All SS Plunger Indexing Plungers |
|||||
| Style | A | |||||||||
| L | 34.50 mm | 43.00 mm | 50.00 mm | 59.00 mm | 77.00 mm | |||||
| D | 3.00 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| H | 3.50 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| D2 | 14.00 mm | 18.00 mm | 21.00 mm | 25.00 mm | 33.00 mm | |||||
| L2 | 5.00 mm | 6.00 mm | 7.00 mm | 8.00 mm | 10.00 mm | |||||
| L3 | 10.00 mm | 13.00 mm | 15.00 mm | 17.00 mm | 23.00 mm | |||||
| L1 | 12.00 mm | 15.00 mm | 17.00 mm | 20.00 mm | 26.00 mm | |||||
| D1 | 1/4-28 in | 5/16-24 in | 3/8-24 in | 1/2-13 in | 5/8-11 in | |||||
| F x 30° | 0.80 mm | 1.00 mm | 1.30 mm | 1.80 mm | 2.30 mm | |||||
| F1 - Spring Force Initial Pressure | 5 N | 6 N | 5 N | 6 N | 15 N | |||||
| F2 - Spring Force Final Pressure | 9 N | 12 N | 12 N | 14 N | 35 N | |||||
| L4 | ||||||||||
| SW1 | 8.00 mm | 10.00 mm | 13.00 mm | 14.00 mm | 19.00 mm | |||||
| SW2 | ||||||||||
| End Pressure Initial-Final | ||||||||||
|
|
||||||||||
