Indexing Plunger with Pull Handle and Cap

Material:

Steel version, locking pin hardened: quality class 5.8

Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034

Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite gray thermoplastic

Surface finish:

Steel version, locking pin hardened: black oxide finish, locking pin ground

Stainless steel version, locking pin hardened: natural finish, locking pin ground

Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

(Kipp Original Design)

Indexing Plunger with Pull Handle and Cap - Locking Pin Hardened - Stainless Steel - Metric

Unit of Measure

Items	M65371 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric	M65373 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric	M65375 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric	M65377 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric	M65382 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric
Material	N/A Stainless Steel
Style	N/A A	N/A A	N/A A	N/A A	N/A B
L	N/A 47.00 mm	N/A 56.00 mm	N/A 74.00 mm	N/A 80.00 mm	N/A 47.00 mm
D	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 10.00 mm	N/A 5.00 mm
H	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 10 mm	N/A 5.00 mm
D2	N/A 21.00 mm	N/A 25.00 mm	N/A 33.00 mm	N/A 33.00 mm	N/A 21.00 mm
L2	N/A 7.00 mm	N/A 8.00 mm	N/A 10.00 mm	N/A 12.00 mm	N/A 7.00 mm
L3	N/A 15.00 mm	N/A 17.00 mm	N/A 23.00 mm	N/A 25.00 mm	N/A 15.00 mm
L1	N/A 17.00 mm	N/A 20.00 mm	N/A 26.00 mm	N/A 28.00 mm	N/A 17.00 mm
Note	N/A
D1	N/A M10 X 1.00 mm	N/A M12 X 1.50 mm	N/A M16 X 1.50 mm	N/A M20 X 1.50 mm	N/A M10 X 1.00 mm
F x 30°	N/A 1.30 mm	N/A 1.80 mm	N/A 2.30 mm	N/A 2.80 mm	N/A 1.30 mm
F1 - Spring Force Initial Pressure	N/A 5 N	N/A 6 N	N/A 15 N	N/A 15 N	N/A 5 N
F2 - Spring Force Final Pressure	N/A 12 N	N/A 14 N	N/A 35 N	N/A 34 N	N/A 12 N
SW1	N/A 13.00 mm	N/A 14.00 mm	N/A 19.00 mm	N/A 22.00 mm	N/A 13.00 mm
SW2	N/A	N/A	N/A	N/A	N/A 17.00 mm
End Pressure Initial-Final	N/A