Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
| Items |
 M65291 Indexing Plunger Short Version - Locking Pin Hardened - Metric |
M65293 Indexing Plunger Short Version - Locking Pin Hardened - Metric |
M65295 Indexing Plunger Short Version - Locking Pin Hardened - Metric |
M65297 Indexing Plunger Short Version - Locking Pin Hardened - Metric |
M65299 Indexing Plunger Short Version - Locking Pin Hardened - Metric |
|||||
| Material | Steel | |||||||||
| Style | A | |||||||||
| L | 30 mm | 35.00 mm | 42.00 mm | 54.00 mm | 61.00 mm | |||||
| D | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | 10.00 mm | |||||
| H | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | 10 mm | |||||
| D2 | 18.00 mm | 21.00 mm | 25.00 mm | 33.00 mm | 33.00 mm | |||||
| L2 | 6.00 mm | 7.00 mm | 8.00 mm | 10.00 mm | 12.00 mm | |||||
| L1 | 6.00 mm | 8.00 mm | 10.00 mm | 12.00 mm | 15.00 mm | |||||
| D1 | M8 X 1.00 mm | M10 X 1.00 mm | M12 X 1.50 mm | M16 X 1.50 mm | M20 X 1.50 mm | |||||
| F x 30° | 1.00 mm | 1.30 mm | 1.80 mm | 2.30 mm | 2.80 mm | |||||
| F1 - Spring Force Initial Pressure | 6 N | 5 N | 6 N | 14 N | 15 N | |||||
| F2 - Spring Force Final Pressure | 12 N | 12 N | 14 N | 28 N | 32 N | |||||
| SW1 | 10.00 mm | 13.00 mm | 14.00 mm | 19.00 mm | 22.00 mm | |||||
| SW2 | ||||||||||
| End Pressure Initial-Final | ||||||||||
|
|
||||||||||
