Material:
Surface finish:
Damper plate PUR elastomere, gray, fixed, cannot slip. range of use from -30 °C to +70 °C. Damper plate PUR elastomere (Sylomer V12).
Note: The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Swivel Foot. Swivel Foot (without vibration absorption) see 07144. This is a Kipp Original Design.
| Items |
 M66789 Leveling Pads with Vibration Absorption - Inch |
M66790 Leveling Pads with Vibration Absorption - Inch |
M66791 Leveling Pads with Vibration Absorption - Inch |
M66792 Leveling Pads with Vibration Absorption - Inch |
M66797 Leveling Pads with Vibration Absorption - Inch |
|||||
| Material | Steel | Steel | Steel | Steel | Stainless Steel | |||||
| D2 | 32.00 mm | 40.00 mm | 50.00 mm | 60.00 mm | 32.00 mm | |||||
| D3 | 30.50 mm | 30.50 mm | 40.50 mm | 50.00 mm | 30.50 mm | |||||
| H2 | 5.00 mm | 6.00 mm | 7.0 mm | 8.00 mm | 5.00 mm | |||||
| H1 | 22.00 mm | 26.00 mm | 32.00 mm | 42.00 mm | 22.00 mm | |||||
| T | 10.00 mm | 12.00 mm | 14.00 mm | 18.00 mm | 10.00 mm | |||||
| D1 | 3/8-16 in | 1/2-13 in | 5/8-11 in | 3/4-10 in | 3/8-16 in | |||||
| SW | 17 mm | 19 mm | 24 mm | 30 mm | 17 mm | |||||
| H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) | 8 / 6.8 / 5.9 mm | |||||||||
| Load capacity (under pressure of 0.4 N/mm²) | 212 N | 212 N | 435 N | 705 N | 212 N | |||||
| Max Load | ||||||||||
| Stud Length | ||||||||||
|
|
||||||||||
