TE Connectivity (Tyco) Solarlok PV4 Crimp Tool 

The Solarlok PV4 crimp hand tool has been especially designed to apply Solarlok PV4 socket and pin contacts with open crimp sleeves. Wire sizes 4 and 6 mm² as well as AWG12 and AWG 10 can be applied with this crimp hand tool. TE Connectivity Part Number: 6-1579014-8

Following Solarlok PV4 contacts can be applied:
- Pin contact PN 1971857 ( 4/6 mm² and AWG12/AWG10 )
- Socket contact PN 1971858 ( 4/6 mm² and AWG12/AWG10 )

The crimp hand tool is only to be used for the contacts listed above. The contacts may only be used in combination with Solar-Wire approved by TE Connectivity.

Technical Documents:
TE-Connectivity-Tyco-Solarlok-PV4-Tool-Manual

Unit of Measure