Hydraulic Support Jack
The work support jack is especially designed to support large work pieces and prevent distortion during machining operation. Its piston is extended fully from spring pressure of 14 pounds when not under load. Either the weight of the work piece or the clamping action sets the piston height. With hydraulic pressure applied, these jacks support a force up to 5,000 pounds. Support force is easily varied by controlling hydraulic pressure. This work support jack automatically adjusts to difference in material thicknesses.
Unit of Measure
Overall Width |
N/A 4.00 in |
Overall Length |
N/A 4.00 in |
Weight |
N/A 3.30 lb |
Effective Piston Area |
N/A 1.60 in² |
Piston Stroke (Max.) |
N/A 0.50 in |
Oil Pressure Rating (Max.) |
N/A 4000 psi |
Force per 1000 PSI |
N/A 1600 lb |
Oil Volume Full Stroke |
N/A 0.05 in³ |
Oil Port Diameter NPTF |
N/A 0.25 in |
Country of Origin |
N/A US |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
