Indexing Plunger with Pull Handle and Cap

Material:

Steel version, locking pin hardened: quality class 5.8

Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034

Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite gray thermoplastic

Surface finish:

Steel version, locking pin hardened: black oxide finish, locking pin ground

Stainless steel version, locking pin hardened: natural finish, locking pin ground

Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

(Kipp Original Design)

Request Information

Unit of Measure

Items	M65371 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric	M65373 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric	M65375 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric	M65377 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric	M65382 Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric
Material	N/A Stainless Steel
Style	N/A A	N/A A	N/A A	N/A A	N/A B
L	N/A 47.00 mm	N/A 56.00 mm	N/A 74.00 mm	N/A 80.00 mm	N/A 47.00 mm
D	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 10.00 mm	N/A 5.00 mm
H	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 10 mm	N/A 5.00 mm
D2	N/A 21.00 mm	N/A 25.00 mm	N/A 33.00 mm	N/A 33.00 mm	N/A 21.00 mm
L2	N/A 7.00 mm	N/A 8.00 mm	N/A 10.00 mm	N/A 12.00 mm	N/A 7.00 mm
L3	N/A 15.00 mm	N/A 17.00 mm	N/A 23.00 mm	N/A 25.00 mm	N/A 15.00 mm
L1	N/A 17.00 mm	N/A 20.00 mm	N/A 26.00 mm	N/A 28.00 mm	N/A 17.00 mm
Note	N/A
D1	N/A M10 X 1.00 mm	N/A M12 X 1.50 mm	N/A M16 X 1.50 mm	N/A M20 X 1.50 mm	N/A M10 X 1.00 mm
F x 30°	N/A 1.30 mm	N/A 1.80 mm	N/A 2.30 mm	N/A 2.80 mm	N/A 1.30 mm
F1 - Spring Force Initial Pressure	N/A 5 N	N/A 6 N	N/A 15 N	N/A 15 N	N/A 5 N
F2 - Spring Force Final Pressure	N/A 12 N	N/A 14 N	N/A 35 N	N/A 34 N	N/A 12 N
SW1	N/A 13.00 mm	N/A 14.00 mm	N/A 19.00 mm	N/A 22.00 mm	N/A 13.00 mm
SW2	N/A	N/A	N/A	N/A	N/A 17.00 mm
End Pressure Initial-Final	N/A