All SS Plunger Indexing Plungers

Material:
• Steel version, locking pin hardened: quality class 5.8
• Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
• Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite grey thermoplastic

Surface finish:
• Steel version, locking pin hardened: black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened: natural finish, locking pin ground
• Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

On request:
Special versions and spacer rings.

Request Information

Unit of Measure

Items	M64850 All SS Plunger Indexing Plungers	M64836 All SS Plunger Indexing Plungers	M64838 All SS Plunger Indexing Plungers	M64840 All SS Plunger Indexing Plungers	M64842 All SS Plunger Indexing Plungers
Style	N/A A
L	N/A 34.50 mm	N/A 43.00 mm	N/A 50.00 mm	N/A 59.00 mm	N/A 77.00 mm
D	N/A 3.00 mm	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm
H	N/A 3.50 mm	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm
D2	N/A 14.00 mm	N/A 18.00 mm	N/A 21.00 mm	N/A 25.00 mm	N/A 33.00 mm
L2	N/A 5.00 mm	N/A 6.00 mm	N/A 7.00 mm	N/A 8.00 mm	N/A 10.00 mm
L3	N/A 10.00 mm	N/A 13.00 mm	N/A 15.00 mm	N/A 17.00 mm	N/A 23.00 mm
L1	N/A 12.00 mm	N/A 15.00 mm	N/A 17.00 mm	N/A 20.00 mm	N/A 26.00 mm
D1	N/A 1/4-28 in	N/A 5/16-24 in	N/A 3/8-24 in	N/A 1/2-13 in	N/A 5/8-11 in
F x 30°	N/A 0.80 mm	N/A 1.00 mm	N/A 1.30 mm	N/A 1.80 mm	N/A 2.30 mm
F1 - Spring Force Initial Pressure	N/A 5 N	N/A 6 N	N/A 5 N	N/A 6 N	N/A 15 N
F2 - Spring Force Final Pressure	N/A 9 N	N/A 12 N	N/A 12 N	N/A 14 N	N/A 35 N
L4	N/A
SW1	N/A 8.00 mm	N/A 10.00 mm	N/A 13.00 mm	N/A 14.00 mm	N/A 19.00 mm
SW2	N/A
End Pressure Initial-Final	N/A