The Nylok locking element holds the Plunger body securely in place without the need for lock nuts or other devices. We recommend a 90º countersink 1/32" larger than the major diameter of the mating thread to prevent damaging the element and reducing the locking torque.
Plungers may be ordered without the locking element. Plungers without an element are the same price, but are considered "Special" and cannot be returned.
- Stainless Steel Body
- Nose Stainless or Delrin-Heavy
- Heavy or Light Pressure
- All plungers standard with Nylok locking element
- Hex drive
- Ball Diameter +.000 -.002
Unit of Measure
Material |
N/A Stainless Steel |
Locking Element |
N/A No |
Spring Pressure |
N/A Heavy |
Body Length |
N/A 1.25 in |
Ball Height |
N/A 0.25 in |
Ball Diameter |
N/A 0.25 in |
Nose Material |
N/A Delrin |
A - Thread Size |
N/A 1/2-13 |
End Pressure Initial-Final |
N/A 6.6 to 17.40 |
Country of Origin |
N/A US |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Plungers & Pin's Guides |
