Metric O-Rings are employed in specialized applications and, like the name suggests, are standardized by metric dimensions. With a wide variety of sizes available, Metric O-Rings fill in the gaps left by the standardized AS568 o-ring chart. Metric O-Ring sizing is determined by the o-ring's inside diameter and cross section width.

This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C). For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
Unit of Measure

Type

N/A Metric Standard O-Ring

Material

N/A Silicone

Cross Section Width

N/A 1.00 mm

Durometer

N/A 70

Inside Diameter

N/A 4.00 mm

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Call for a Quote

N/A O-rings are used in the military, automotive,