The Nylok locking element holds the Plunger body securely in place without the need for lock nuts or other devices. We recommend a 90 Degree countersink 1/32 larges than the major diameter of the mating thread to prevent damaging the element and reducing the locking torque.
Material |
N/A Stainless Steel |
Locking Element |
N/A No |
Spring Pressure |
N/A Heavy |
Thread |
N/A 10-32 |
Nose Material |
N/A Stainless Steel |
End Pressure Full (1/2) |
N/A 4 lb |
End Pressure Full (Final) |
N/A 6.25 lb |
A - Thread Size |
N/A 10-32 |
B - Body Length |
N/A 0.47 in |
C - Nose Length |
N/A 0.07 in |
D - Nose Dia. |
N/A 0.09 in |
End Pressure Initial-Final |
N/A 4.00 to 6.25 (1/2) |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Plungers & Pin's Guides |
NEED custom manufacturing? WE are the experts. REQUEST RFQ
