Metric O-Rings are employed in specialized applications and, like the name suggests, are standardized by metric dimensions. With a wide variety of sizes available, Metric O-Rings fill in the gaps left by the standardized AS568 o-ring chart. Metric O-Ring sizing is determined by the o-ring's inside diameter and cross section width.
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C). For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C). For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
Unit of Measure
Type |
N/A Metric Standard O-Ring |
Material |
N/A Silicone |
Cross Section Width |
N/A 1.00 mm |
Durometer |
N/A 70 |
Inside Diameter |
N/A 24.00 mm |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Call for a Quote |
N/A O-rings are used in the military, automotive, |