Mechanical Extension Springs are coiled products, in a variety of materials and forms. Extension springs are attached to two components from both ends of the spring, and when the components pull apart, the spring tries to pull the components together again. Extension Springs are wound to oppose extension.
Dependant on the application's load requirements, the springs initial tension can be manipulated. They are often tightly wound in the no-load position and have hooks, eyes, or spring anchors at the ends to attach to the components. Each spring is designed within proper stress levels and manufacturing limits.
Unit of Measure
Weight |
N/A 0.000546 Pound |
Material |
N/A ASTM-A228 or AMS-5112, Music Wire |
Height |
N/A 1.12 Inch |
Depth |
N/A 0.120 Inch |
Width |
N/A 0.120 Inch |
Application & Uses |
N/A Cable Return, Balance, Belt Tensioner, etc. |
Features/Advantages/Benefits |
N/A Standard Part |
Country of Origin |
N/A US |
Outside Dia (In.) |
N/A 0.120 Inch |
Wire Dia (In.) |
N/A 0.014 Inch |
Free Length (In.) |
N/A 1.12 Inch |
Spring Rate (lbs./In.) |
N/A 0.7 lbs/in |
Initial Tension (lbs) |
N/A 0.10 Pound |
Ends |
N/A Full Twist Loop |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
