Material:
• Steel version, locking pin hardened:  quality class 5.8
• Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
• Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite grey thermoplastic

Surface finish:
• Steel version, locking pin hardened:  black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened: natural finish, locking pin ground
• Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

On request:
Special versions and spacer rings.

Unit of Measure

Style

N/A D

D

N/A 10.00 mm

H

N/A 10 mm

D2

N/A 33.00 mm

L2

N/A 12.00 mm

L3

N/A 25.00 mm

L1

N/A 28.00 mm

D1

N/A 3/4-10 in

F x 30°

N/A 2.60 mm

F1 - Spring Force Initial Pressure

N/A 15 N

F2 - Spring Force Final Pressure

N/A 34 N

L4

N/A 74.00 mm

SW1

N/A 22.00 mm

SW2

N/A 1-1/8 in

Country of Origin

N/A -

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Product Guides

N/A Plungers & Pin's Guides