Material:
Plate steel, damper plate PUR elastomere (Sylomer V12)
Surface finish:
Plate blue chromated; damper plate gray, fixed, cannot slip. Range of use from -30 °C to +70 °C
Note:
The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used.
This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur.
The damper plate absorbs vibrations and prevents slipping of the Locating Foot.
Unit of Measure
D |
N/A 36.00 mm |
H |
N/A 15 mm |
D2 |
N/A 5.50 mm |
D1 |
N/A 31.00 mm |
Load capacity (under pressure of 0.4 N/mm²) |
N/A 212 N |
H1 (under pressure of 0 / 0.4 / 0.6 N/mm²) |
N/A 4 / 2.8 / 1.9 mm |
Country of Origin |
N/A - |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
