Wiley Grounding Lug WILEYLUG8.2

Catalog Number: WILEYLUG8.2
Item Number: 50028869
Length / Width / Height: 
1.575 in / .709 in / .472 in
Hole Size In. [mm]: 0.323 [8.20]
Mounting Hardware: M8 or 5/16 inch hardware not included
Assembled: NO

The Wiley Grounding Lug is available unassembled, without installation hardware, and with standard hole sizes of
1/4” and 5/16” (M8). Perfect for galvanized steel applications or anywhere a WEEB washer is not required.

Constructed of corrosion resistant, tin-plated copper, the Wiley line of grounding lugs are high quality solutions for your solar PV system. The tin-plated lug assures minimum contact resistance and protection against corrosion. The low profile of the grounding lug allows it to be installed in a variety of positions with one solid or stranded copper wire (14 AWG to 6 AWG), or two copper wires (12 AWG to 10 AWG). Copper wire is secured by a 1/4-28 stainless steel screw, which is horizontal to the tang. This allows for easy access when mounted under a PV module. The result is a continuous ground on all solar applications.

Features:
- Material: tin-plated copper
- Outdoor rated
- Low profile design
- Perfect for galvanized steel applications or anywhere a
- For applications in which a WEEB washer is not required
- Multiple equipment ground conductor allowance:
- One 14 AWG to 6 AWG or two 10 AWG, two 12 AWG
-  Listed to ANSI/UL 467 by Intertek ETL

Technical Documents:
Wiley-WEEB-Grounding-Lug-Specsheet

 

Click Here to Contact Us, or give us a call at 1-888-356-1662.
Unit of Measure