Item # 0783-3R, SolaDeck Model 0783-3R (AC/DC Pass thru) 2 Position ground block UL50 Type 3R

SolaDeck Model 0766-41 AD 6 in. Deep Tile & Slate Kit With Flashing (DC Combiner) 5 Position ground block UL 1741 1st Ed, UL50 Type 3R CSA C22.2 #107.1-01 (2006)

The SolaDeck UL 1741 SolaDeck Combiners/Enclosure models are most commonly used when combining strings of solar modules.

SolaDeck 0766-41 AD Details:
- 6" Slotted din rail installed
- ETL listed and labeled to the UL 1741 Standard
- Rated 600 Volt DC 120 amps, 120/240 Volt 60 amps
- Includes 30" x 30" dead soft aluminum flashing

SolaDeck is a PV wire enclosure and seamless flashed product all in one. SolaDeck eliminates the multiple parts and respective labor typically needed to accomplish the roof penetration for a weather-tight wiring passageway into the home.

Unique in the solar industry, SolaDeck is designed with a seamless flashing consistent with standard roofing practices for roof penetration. All SolaDeck models are third party tested by ETL to the UL50 Type 3R or UL1741 standards. NOTE: SolaDeck enclosures include din rail, ground blocks, and aluminum strain clip. Product image for reference, internal components sold separately and may vary depending on model - check out the SolaDeck components list below for more info.

All SolaDeck Enclosures Feature:
- 18 gauge galvanized steel Powder coated finish
- Seamless stamped construction
- Three roof deck knockouts (½"e;, ¾"e;, 1")
- Five center points for entry or exit
- Two or five position ground block
- Flashes in the roof system
- Mounting hardware included
- Listed to respective UL standards (UL50 Type 3R or UL1741)

Technical Documents:
Soladeck_Manual
SolaDeck Components List