The Silent-Lign range solves your complex engineering problems both in new product design and replacement on noisy, new and used equipment. Field proven, these assemblies offer low initial cost, low maintenance cost, and a minimum of parts.

Silent-Lign bearings are oil impregnated. The porous bronze sleeve acts as a metallic sponge. It constantly obtains sufficient lubrication through absorption with the application of a few drops of oil as necessary.

The neoprene wall is an oil-resistant flexing medium. It can take up a high angle of torsional movement. As the amount of misalignment increases, the thickness of the neoprene is increased and its length is reduced. This permits the entire I.D. of the bearing to be utilized, with no shaft gall at the edges. Similarly, the neoprene wall silences vibrations and eliminates the transmission of noise.Insulated with Neoprene, these flexible sleeve bearings accommodate shaft misalignment to provide extremely quiet operation.

    Features
  • Accommodate Maximum Misalignment
  • Require No Line Reaming
  • Reduce Noise and Vibration
  • Self-Lubricate Constantly with Porous Bronze Sleeve
  • Serve a variety of Light and Medium Load Applications
  • Quiets New and Used Equipment

Unit of Measure

A - Inner Diameter

N/A .876-.877 Inch

B - Outer Diameter

N/A 1.624-1.625 Inch

C - Hub Diamter

N/A 7/8 Inch

D - Overall Length

N/A 1.5 Inch

E - Bushing Length

N/A 1.375 Inch

F - Gauge

N/A 16 Inch

Country of Origin

N/A US

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Product Guides

N/A Bearing Guides