All SS Plunger Indexing Plungers - Locking Pin Not Hardened - Metric
Kipp - Pins
Material:
• Steel version, locking pin hardened: quality class 5.8
• Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
• Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305
Mushroom knob in anthracite grey thermoplastic
• Steel version, locking pin hardened: quality class 5.8
• Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
• Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305
Mushroom knob in anthracite grey thermoplastic
Surface finish:
• Steel version, locking pin hardened:
black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened:
natural finish, locking pin ground
• Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
1 2
Item # |
Item Name |
IntegrationID |
Style |
L |
D |
H |
D2 |
L2 |
L3 |
L1 |
D1 |
F x 30° |
L4 |
SW1 |
SW2 |
End Pressure Initial-Final |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M65024 | N/A All SS Plunger Indexing Plungers |
IntegrationID
N/A 76132 |
Style N/A D | L N/A | D N/A 4.00 mm | H N/A 4.00 mm | D2 N/A 18.00 mm | L2 N/A 6.00 mm | L3 N/A 13.00 mm | L1 N/A 15.00 mm | D1 N/A 5/16-24 in | F x 30° N/A 1.00 mm | L4 N/A 38.50 mm | SW1 N/A 10.00 mm | SW2 N/A 1/2 in | End Pressure Initial-Final N/A |
M65027 | N/A All SS Plunger Indexing Plungers |
IntegrationID
N/A 76133 |
Style N/A D | L N/A | D N/A 5.00 mm | H N/A 5.00 mm | D2 N/A 21.00 mm | L2 N/A 7.00 mm | L3 N/A 15.00 mm | L1 N/A 17.00 mm | D1 N/A 3/8-24 in | F x 30° N/A 1.30 mm | L4 N/A 43.50 mm | SW1 N/A 13.00 mm | SW2 N/A 9/16 in | End Pressure Initial-Final N/A |
M65032 | N/A All SS Plunger Indexing Plungers |
IntegrationID
N/A 76134 |
Style N/A D | L N/A | D N/A 6.00 mm | H N/A 6.00 mm | D2 N/A 25.00 mm | L2 N/A 8.00 mm | L3 N/A 17.00 mm | L1 N/A 20.00 mm | D1 N/A 1/2-13 in | F x 30° N/A 1.80 mm | L4 N/A 52.00 mm | SW1 N/A 14.00 mm | SW2 N/A 3/4 in | End Pressure Initial-Final N/A |
M65034 | N/A All SS Plunger Indexing Plungers |
IntegrationID
N/A 76135 |
Style N/A D | L N/A | D N/A 8.00 mm | H N/A 8.00 mm | D2 N/A 33.00 mm | L2 N/A 10.00 mm | L3 N/A 23.00 mm | L1 N/A 26.00 mm | D1 N/A 5/8-11 in | F x 30° N/A 2.30 mm | L4 N/A 68.00 mm | SW1 N/A 19.00 mm | SW2 N/A 15/16 in | End Pressure Initial-Final N/A |
M65036 | N/A All SS Plunger Indexing Plungers |
IntegrationID
N/A 76136 |
Style N/A D | L N/A | D N/A 10.00 mm | H N/A 10 mm | D2 N/A 33.00 mm | L2 N/A 12.00 mm | L3 N/A 25.00 mm | L1 N/A 28.00 mm | D1 N/A 3/4-10 in | F x 30° N/A 2.60 mm | L4 N/A 74.00 mm | SW1 N/A 22.00 mm | SW2 N/A 1-1/8 in | End Pressure Initial-Final N/A |
M65038 | N/A All SS Plunger Indexing Plungers |
IntegrationID
N/A 76137 |
Style N/A D | L N/A | D N/A 12.00 mm | H N/A 12 mm | D2 N/A 33.00 mm | L2 N/A 14.00 mm | L3 N/A 25.00 mm | L1 N/A 28.00 mm | D1 N/A 3/4-16 in | F x 30° N/A 2.80 mm | L4 N/A 78.00 mm | SW1 N/A 22.00 mm | SW2 N/A 1-1/8 in | End Pressure Initial-Final N/A |
M65040 | N/A All SS Plunger Indexing Plungers |
IntegrationID
N/A 76138 |
Style N/A D | L N/A | D N/A 16.00 mm | H N/A 16 mm | D2 N/A 40.00 mm | L2 N/A 18.00 mm | L3 N/A 28.00 mm | L1 N/A 32.00 mm | D1 N/A 1-8 in | F x 30° N/A 3.20 mm | L4 N/A 96.00 mm | SW1 N/A 27.00 mm | SW2 N/A 1-1/2 in | End Pressure Initial-Final N/A |
1 2