Alnico Island 2-Pole magnet housed in a steel cup. Especially effective in mold applications. Can not be press fit without additional insulation. Use bottom tapped hole for mounting purposes. +/- .005" diameter & +/- .015" length. Maximum temperature is 800 Fahrenheit (427C). Holding forces stated are shown at 50% of the actual tested value.
Did you want to learn more about Magnets? Give us a call or take a look at our magnet guides.
Item # |
IntegrationID |
Diameter |
Overall Length |
Tap Thread |
Tap Depth |
Holding Value (Flat Items) |
Quantity |
|---|---|---|---|---|---|---|---|
| IMA375 |
N/A 1808 |
N/A 0.38 in | N/A 0.50 in | N/A 8-32 | N/A 0.09 in | N/A 0.72 lb | |
| IMA500 |
N/A 1809 |
N/A 0.50 in | N/A 0.50 in | N/A 10-32 | N/A 0.16 in | N/A 1.13 lb | |
| IMA502 |
N/A 1810 |
N/A 0.50 in | N/A 0.75 in | N/A 10-32 | N/A 0.19 in | N/A 1.54 lb | |
| IMA504 |
N/A 1811 |
N/A 0.50 in | N/A 1.00 in | N/A 10-32 | N/A 0.25 in | N/A 1.75 lb | |
| IMA625 |
N/A 1812 |
N/A 0.63 in | N/A 0.50 in | N/A 10-32 | N/A 0.16 in | N/A 1.19 lb | |
| IMA750 |
N/A 1815 |
N/A 0.75 in | N/A 0.50 in | N/A 10-32 | N/A 0.16 in | N/A 2.69 lb | |
| IMA752 |
N/A 1816 |
N/A 0.75 in | N/A 0.75 in | N/A 10-32 | N/A 0.25 in | N/A 4.56 lb | |
| IMA754 |
N/A 1817 |
N/A 0.75 in | N/A 1.00 in | N/A 10-32 | N/A 0.25 in | N/A 4.69 lb | |
| IMA756 |
N/A 1818 |
N/A 0.75 in | N/A 1.25 in | N/A 10-32 | N/A 0.25 in | N/A 4.81 lb | |
| IMA1000 |
N/A 1819 |
N/A 1 in | N/A 0.50 in | N/A 1/4-20 | N/A 0.16 in | N/A 4.00 lb | |
| IMA1002 |
N/A 1820 |
N/A 1 in | N/A 0.75 in | N/A 1/4-20 | N/A 0.25 in | N/A 5.50 lb | |
| IMA1004 |
N/A 1821 |
N/A 1 in | N/A 1.00 in | N/A 1/4-20 | N/A 0.28 in | N/A 7.25 lb | |
| IMA1256 |
N/A 1823 |
N/A 1.25 in | N/A 1.25 in | N/A 1/4-20 | N/A 0.28 in | N/A 12.5 lb |
