Our industrial cam levers are great for any application where adjustments need to be made for repositioning and clamping. Cam lever fasteners allow for fastening and unfastening and can be used without tools. A user can tighten by threading like a traditional fastener. A user can finalize tightening by pushing the lever downward. Engineered and manufactured to strict standards, our cam levers can be used virtually in every industrial product.
Material, surface finish:
Handle 1.4308, electrolytic polished;
thrust washer in fiber glass reinforced plastic PA 66 GF 35-X, black; (Kipp Original Design)
hinge pin, threaded stud and washer 1.4305, natural finish
Note:
Adjustable Cam Levers are unique from the original Cam Lever Series in that Adjustable Cam Levers have a screwdriver slot located at the top end ot the stud to allow for fine adjustment when clamping space is limited.
A |
N/A 70.40 mm |
B |
N/A 21.50 mm |
H |
N/A 14.50 mm |
Size |
N/A 1.00 |
D2 |
N/A 9.00 mm |
H1 |
N/A 22.00 mm |
A1 |
N/A 79.20 mm |
D1 |
N/A 18.00 mm |
Insert Material |
N/A Stainless Steel |
D - External Thread |
N/A 1/4-20 in |
B1 |
N/A 15 mm |
F - Clamping Force |
N/A 4.00 kN |
Hand Force |
N/A 120 N |
S - Throw |
N/A 1.20 mm |
L - Screw Length |
N/A 50.00 mm |
Country of Origin |
N/A - |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
