Simple in design and construction, each Vibro Leveler has an inner cylinder with attached stud. These are insulated from the outer shell by a wall of mechanically bonded rubber.
Features:
Load Capacity of Each Mounting |
N/A 200 lbs |
Max. (Avg) Deflection Under Rated Load |
N/A 0.0625 |
A - Height Floor to Top of Nut Min. Ht Above Floor |
N/A 2.25 in |
B - Height (O.A.) Mount Including Stud |
N/A 3.75 in |
C - Height of Stud Above Lower Nut |
N/A 1.38 in |
D - Diamter of Stud |
N/A 1/2 in |
E - Diameter of Housing |
N/A 1.75 in |
F - Bolt Hole Center |
N/A 2.75 in |
G - Diamtere of Base |
N/A 3.50 in |
H - Flange Height |
N/A 0.17 in |
I - Diameter of Bolt Holes in Base |
N/A 0.38 in |
J - Height of Body Above Flange |
N/A 1.50 in |
Country of Origin |
N/A US |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
