Print Back

Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.

For more information on loose joint hinges, please see: The Benefits of Loose Joint Hinges, Standard Hinges vs Loose Joint Hinges: What’s the Difference? and What Are Loose Joint Hinges?

Stainless Steel Flag Type D Loose Hinge
Unit of Measure
Items Stainless Steel Flag Type D Loose Hinge
LJH1200-SS
Stainless Steel Flag Type D Loose Hinge
Stainless Steel Flag Type D Loose Hinge
LJH1196-SS
Stainless Steel Flag Type D Loose Hinge
Stainless Steel Flag Type D Loose Hinge
LJH1198-SS
Stainless Steel Flag Type D Loose Hinge
Stainless Steel Flag Type D Loose Hinge
LJH1192-SS
Stainless Steel Flag Type D Loose Hinge
Stainless Steel Flag Type D Loose Hinge
LJH1194-SS
Stainless Steel Flag Type D Loose Hinge
Length N/A 2.00 in N/A 3.00 in N/A 4.00 in N/A 2.50 in N/A 3.00 in
Type N/A D
Gauge N/A 0.06 in N/A 0.075 in N/A 0.075 in N/A 0.09 in N/A 0.09 in
Open Width N/A 2.00 in N/A 2.00 in N/A 3.00 in N/A 2.00 in N/A 3.00 in
Pin Diameter N/A 0.125 in N/A 0.187 in N/A 0.187 in N/A 0.187 in N/A 0.25 in
Material/Type N/A Stainless Steel - Flag
Hinge Leaf Material N/A Stainless Steel - 304-2B
Hinge Pin Material N/A 303/304 Cold Finish