Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
On request:
Special versions.
| Items |
 M65653 Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric |
M65607 Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric |
M65611 Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric |
M65629 Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric |
M65645 Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric |
|||||
| Material | Steel | |||||||||
| Style | G | |||||||||
| L | 31.50 mm | 43.00 mm | 50.00 mm | 59.00 mm | 77.00 mm | |||||
| D | 3.00 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| H | 3.50 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| D2 | 14.00 mm | 18.00 mm | 21.00 mm | 25.00 mm | 33.00 mm | |||||
| L2 | 11.00 mm | 18.00 mm | 21.00 mm | 25.00 mm | 33.00 mm | |||||
| L1 | 17.00 mm | 21.00 mm | 24.00 mm | 28.00 mm | 36.00 mm | |||||
| D1 | 1/4-28 in | 5/16-24 in | 3/8-24 in | 1/2-13 in | 5/8-11 in | |||||
| F x 30° | 0.80 mm | 1.00 mm | 1.30 mm | 1.80 mm | 2.30 mm | |||||
| F1 - Spring Force Initial Pressure | 4.5 N | 6 N | 5 N | 6 N | 15 N | |||||
| F2 - Spring Force Final Pressure | 9 N | 12 N | 12 N | 14 N | 35 N | |||||
| SW | ||||||||||
| End Pressure Initial-Final | ||||||||||
|
|
||||||||||
