The perfect solution for mounting levelers and glides to hollow tubes and pipes, frequently found on conveyor frames and aluminum profiles. Strong, glass-fiber reinforced nylon with molded-in brass insert is extremely durable. All tube ends will work with our POLYMOUNT, SNAP-LOCK and GLIDE RITE product offerings.
-
Features:
- Thread sizes from 3/8-16 to 3/4-10 available from stock
- 3/4 to 1 ton capacities
- Available for 1 1/2 inch and 2 inch square and round tubes
- Available for schedule 10 pipe
- Custom thread sizes are available for sufficient quantities
- Simple to install; a light hammer blow is all that is required to seat the insert into your tube or pipe
Unit of Measure
A - Thread Size |
N/A 1/2-13 |
Outside Dimensions (Sq.) |
N/A 1.50 in |
Tube Gauge / Shape |
N/A 16 ga. Square |
Tube Size O.D. (Sq.) |
N/A 1.50 in |
Tube Size Wall |
N/A 0.07 in |
Static Load |
N/A 1500 lb |
Country of Origin |
N/A US |
Max Load |
N/A 1500 lbs (680 kg) |
Stud or Tapped |
N/A Tapped |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Leveling Mount & Feet Guides |
