The unique base on this PolyMount offsets the lag hole to the outside of the machine footprint, simplifying lag bolt installation. The offset allows you to drill the lag bolt hole without moving the machine, and is capable of fitting up to a 1/2" diameter lag bolt.
Unit of Measure
Material |
N/A Stainless Steel |
Thread Length (C) |
N/A 8.00 in |
Thread (A) |
N/A 3/4-10 |
Base Dia. (B) |
N/A 4 in |
Base Width |
N/A 5 7/16 in |
Total Height (D) |
N/A 9 5/8 in |
Hex Size (E) |
N/A 1 1/16 in |
Max Load (lbs) |
N/A 7500 lbs |
Ship Wt. (lbs) |
N/A 1.37 lbs |
Country of Origin |
N/A US |
Max Load |
N/A 7500 lbs (3402 kg) |
Stud Length |
N/A 8.00 in (203 mm) |
PS - Insert |
N/A Stud |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Leveling Mount & Feet Guides |
