Material:
-Steel quality class 5.8
Surface finish:
-Blue chromated
Note:
-Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions.
Unit of Measure
Finish |
N/A Steel Blue Chromate |
L |
N/A 73.00 in |
A |
N/A 31.00 in |
D |
N/A 8.00 in |
H |
N/A 19.00 in |
D2 |
N/A 4.70 in |
L2 |
N/A 22.00 in |
L3 |
N/A 28.00 in |
L1 |
N/A 32.00 in |
D1 |
N/A M12 mm |
F x 30° |
N/A 1.30 in |
F1 - Spring Force Initial Pressure |
N/A 4 N |
F2 - Spring Force Final Pressure |
N/A 22 N |
SW1 |
N/A 12.00 in |
Tightening Torque Max. |
N/A 13 nm |
Country of Origin |
N/A - |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Plungers & Pin's Guides |
