Indexing Plunger - No Pull Knob - Locking Pin Hardened

Material:

Steel version, locking pin hardened: quality class 5.8

Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034

Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Surface finish:

Steel version, locking pin hardened: black oxide finish, locking pin ground

Stainless steel version, locking pin hardened: natural finish, locking pin ground

Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.

On request:
Special versions and spacer rings.

(Kipp Original Design)

Request Information

Unit of Measure

Items	M65547 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric	M65491 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric	M65495 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric	M65513 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric	M65530 Indexing Plunger - No Pull Knob - Locking Pin Hardened - Steel - Metric
Material	N/A Steel
Style	N/A E
L	N/A 24.00 mm	N/A 32.00 mm	N/A 37.00 mm	N/A 42.00 mm	N/A 56.00 mm
D	N/A 3.00 mm	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm
H	N/A 3.50 mm	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm
L2	N/A 5.00 mm	N/A 6.00 mm	N/A 7.00 mm	N/A 8.00 mm	N/A 10.00 mm
L3	N/A 3.50 mm	N/A 7.00 mm	N/A 8.00 mm	N/A 8.00 mm	N/A 12.00 mm
L1	N/A 12.00 mm	N/A 15.00 mm	N/A 17.00 mm	N/A 20.00 mm	N/A 26.00 mm
D1	N/A 1/4-28 in	N/A 5/16-24 in	N/A 3/8-24 in	N/A 1/2-13 in	N/A 5/8-11 in
F x 30°	N/A 0.80 mm	N/A 1.00 mm	N/A 1.30 mm	N/A 1.80 mm	N/A 2.30 mm
F1 - Spring Force Initial Pressure	N/A 5 N	N/A 6 N	N/A 5 N	N/A 6 N	N/A 15 N
F2 - Spring Force Final Pressure	N/A 9 N	N/A 12 N	N/A 12 N	N/A 14 N	N/A 35 N
L4	N/A 10.00 mm	N/A 13.00 mm	N/A 15.00 mm	N/A 17.00 mm	N/A 23.00 mm
SW1	N/A 8.00 mm	N/A 10.00 mm	N/A 13.00 mm	N/A 14.00 mm	N/A 19.00 mm
SW2	N/A
D2	N/A M2 mm	N/A M3 mm	N/A M 4 mm	N/A M 6 mm	N/A M 8 mm
End Pressure Initial-Final	N/A
Diameter	N/A
Stud Length	N/A