Indexing Plunger - No Pull Knob - Locking Pin Not Hardened

Material:

Steel version, locking pin hardened: quality class 5.8

Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034

Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Surface finish:

Steel version, locking pin hardened: black oxide finish, locking pin ground

Stainless steel version, locking pin hardened: natural finish, locking pin ground

Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.

On request:
Special versions and spacer rings.

(Kipp Original Design)

Request Information

Unit of Measure

Items	M65508 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric	M65492 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric	M65496 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric	M65498 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric	M65500 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric
Material	N/A Stainless Steel
Style	N/A E
L	N/A 24.00 mm	N/A 32.00 mm	N/A 37.00 mm	N/A 42.00 mm	N/A 56.00 mm
D	N/A 3.00 mm	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm
H	N/A 3.50 mm	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm
L2	N/A 5.00 mm	N/A 6.00 mm	N/A 7.00 mm	N/A 8.00 mm	N/A 10.00 mm
L3	N/A 3.50 mm	N/A 7.00 mm	N/A 8.00 mm	N/A 8.00 mm	N/A 12.00 mm
L1	N/A 12.00 mm	N/A 15.00 mm	N/A 17.00 mm	N/A 20.00 mm	N/A 26.00 mm
D1	N/A M6 X 0.75 mm	N/A M8 X 1.00 mm	N/A M10 X 1.00 mm	N/A M12 X 1.50 mm	N/A M16 X 1.50 mm
F x 30°	N/A 0.80 mm	N/A 1.00 mm	N/A 1.30 mm	N/A 1.80 mm	N/A 2.30 mm
F1 - Spring Force Initial Pressure	N/A 4.5 N	N/A 6 N	N/A 5 N	N/A 6 N	N/A 15 N
F2 - Spring Force Final Pressure	N/A 9 N	N/A 12 N	N/A 12 N	N/A 14 N	N/A 35 N
L4	N/A 10.00 mm	N/A 13.00 mm	N/A 15.00 mm	N/A 17.00 mm	N/A 23.00 mm
SW1	N/A 8.00 mm	N/A 10.00 mm	N/A 13.00 mm	N/A 14.00 mm	N/A 19.00 mm
SW2	N/A
D2	N/A M2 mm	N/A M3 mm	N/A M4 mm	N/A M6 mm	N/A M8 mm
End Pressure Initial-Final	N/A
Diameter	N/A
Stud Length	N/A