Indexing Plunger W/Pull Ring - Locking Pin Not Hardened

Material:

Steel version, locking pin hardened: quality class 5.8

Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034

Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Key ring 1.4310, natural finish

Surface finish:

Steel version, locking pin hardened: black oxide finish, locking pin ground

Stainless steel version, locking pin hardened: natural finish, locking pin ground

Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been disengaged.The key ring is also suitable for actuation of the locking bolt, for example automatically (programme-controlled) with the aid of a pneumatic cylinder or actuation by remote control with bowden cables.

On request:
Special versions and spacer rings.

(Kipp Original Design)

Request Information

Unit of Measure

Items	M65528 Indexing Plunger W/Pull Ring - Locking Pin Not Hardened - Stainless Steel - Metric	M65531 Indexing Plunger W/Pull Ring - Locking Pin Not Hardened - Stainless Steel - Metric	M65532 Indexing Plunger W/Pull Ring - Locking Pin Not Hardened - Stainless Steel - Metric	M65533 Indexing Plunger W/Pull Ring - Locking Pin Not Hardened - Stainless Steel - Metric	M65534 Indexing Plunger W/Pull Ring - Locking Pin Not Hardened - Stainless Steel - Metric
Material	N/A Stainless Steel
Style	N/A R
D	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 10.00 mm
H	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 10 mm
D4	N/A 15.00 mm	N/A 23.00 mm	N/A 23.00 mm	N/A 28.00 mm	N/A 28.00 mm
L2	N/A 6.00 mm	N/A 7.00 mm	N/A 8.00 mm	N/A 10.00 mm	N/A 12.00 mm
L1	N/A 15.00 mm	N/A 17.00 mm	N/A 20.00 mm	N/A 26.00 mm	N/A 28.00 mm
D1	N/A M8 X 1.00 mm	N/A M10 X 1.00 mm	N/A M12 X 1.50 mm	N/A M16 X 1.50 mm	N/A M20 X 1.50 mm
F x 30°	N/A 1.00 mm	N/A 1.30 mm	N/A 1.80 mm	N/A 2.30 mm	N/A 2.80 mm
F1 - Spring Force Initial Pressure	N/A 6 N	N/A 5 N	N/A 6 N	N/A 15 N	N/A 15 N
F2 - Spring Force Final Pressure	N/A 12 N	N/A 12 N	N/A 14 N	N/A 35 N	N/A 34 N
L4	N/A 13.00 mm	N/A 15.00 mm	N/A 17.00 mm	N/A 23.00 mm	N/A 25.00 mm
SW1	N/A 10.00 mm	N/A 13.00 mm	N/A 14.00 mm	N/A 19.00 mm	N/A 22.00 mm
SW2	N/A
End Pressure Initial-Final	N/A