Sleeves Push Fit - Metric
Handle Sleeve (7 Styles)
ELESA Original Design.
We have many hand sleeves in stock. Please call for any special reuirements
-
Features:
- Material - Elastomer Technopolymer with Shore Hardness of D 40
- Finish - Matte Black
- Push-fit on Plain Shaft - h9 Tolerance
- Elastic Coupling - Not Affected by Vibrations and does not Tend to Loosen
- Resistant to Solvents, Oils, Greases, and other Chemical Agents
- Tapped Blind Hole Assembly instructions: Carefully fit handle onto slightly chamfered end of shaft and push as far as possible by hand; then tap handle with a wooden or plastic mallet until firmly in place.
ELESA Original Design.
Unit of Measure
Items |
M-30938 Sleeves Push Fit - Metric |
M-30939 Sleeves Push Fit - Metric |
||
Material | N/A Elastomer Technopolymer | |||
Finish | N/A Matte Black | |||
A - Thread Size | N/A M10 x1.50 | N/A M12 x1.75 | ||
B - Handle Diameter | N/A 21.00 mm | |||
D - Diameter | N/A 45.00 mm | |||
F - Overall Length | N/A 65.00 mm | |||
Z4 - Depth | N/A 50.00 mm | |||
Alternate P/N | N/A 30938 | N/A 30939 | ||
|