Print Back

Alnico Island 2-Pole magnet housed in a steel cup. Especially effective in mold applications. Can not be press fit without additional insulation. Use bottom tapped hole for mounting purposes. +/- .005" diameter & +/- .015" length. Maximum temperature is 800 Fahrenheit (427C). Holding forces stated are shown at 50% of the actual tested value.

Did you want to learn more about Magnets? Give us a call or take a look at our magnet guides.

Alnico Magnet Assemblies - Island 2 Pole
Unit of Measure
1 

Item #

IntegrationID

Diameter

Overall Length

Tap Thread

Tap Depth

Holding Value (Flat Items)

Quantity
IMA375 N/A
1808
N/A 0.38 in N/A 0.50 in N/A 8-32 N/A 0.09 in N/A 0.72 lb
IMA500 N/A
1809
N/A 0.50 in N/A 0.50 in N/A 10-32 N/A 0.16 in N/A 1.13 lb
IMA502 N/A
1810
N/A 0.50 in N/A 0.75 in N/A 10-32 N/A 0.19 in N/A 1.54 lb
IMA504 N/A
1811
N/A 0.50 in N/A 1.00 in N/A 10-32 N/A 0.25 in N/A 1.75 lb
IMA625 N/A
1812
N/A 0.63 in N/A 0.50 in N/A 10-32 N/A 0.16 in N/A 1.19 lb
IMA750 N/A
1815
N/A 0.75 in N/A 0.50 in N/A 10-32 N/A 0.16 in N/A 2.69 lb
IMA752 N/A
1816
N/A 0.75 in N/A 0.75 in N/A 10-32 N/A 0.25 in N/A 4.56 lb
IMA754 N/A
1817
N/A 0.75 in N/A 1.00 in N/A 10-32 N/A 0.25 in N/A 4.69 lb
IMA756 N/A
1818
N/A 0.75 in N/A 1.25 in N/A 10-32 N/A 0.25 in N/A 4.81 lb
IMA1000 N/A
1819
N/A 1 in N/A 0.50 in N/A 1/4-20 N/A 0.16 in N/A 4.00 lb
IMA1002 N/A
1820
N/A 1 in N/A 0.75 in N/A 1/4-20 N/A 0.25 in N/A 5.50 lb
IMA1004 N/A
1821
N/A 1 in N/A 1.00 in N/A 1/4-20 N/A 0.28 in N/A 7.25 lb
IMA1256 N/A
1823
N/A 1.25 in N/A 1.25 in N/A 1/4-20 N/A 0.28 in N/A 12.5 lb
Unit of Measure
1