The unique base on this PolyMount offsets the lag hole to the outside of the machine footprint, simplifying lag bolt installation. The offset allows you to drill the lag bolt hole without moving the machine, and is capable of fitting up to a 1/2" diameter lag bolt. Comes with a base pad.
Material |
N/A Stainless Steel |
Thread Length (C) |
N/A 152 mm |
Thread (A) |
N/A M12 |
Base Dia. (B) |
N/A 100 mm |
Base Width |
N/A 138 mm |
Total Height (D) |
N/A 194 mm |
Hex Size (E) |
N/A 20 mm |
Ship Wt. (lbs) |
N/A 0.71 kg |
Max Load (kg) |
N/A 2270 kg |
Country of Origin |
N/A US |
Max Load |
N/A 5000 lbs (2268 kg) |
Stud Length |
N/A 6.00 in (152 mm) |
PS - Insert |
N/A Stud |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Leveling Mount & Feet Guides |
