Surface finish:
• Steel version, locking pin hardened:
black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened:
natural finish, locking pin ground
• Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Style |
N/A B |
L |
N/A 83.00 mm |
D |
N/A 10.00 mm |
H |
N/A 10 mm |
D2 |
N/A 33.00 mm |
L2 |
N/A 12.00 mm |
L3 |
N/A 25.00 mm |
L1 |
N/A 28.00 mm |
D1 |
N/A 3/4-10 in |
F x 30° |
N/A 2.60 mm |
F1 - Spring Force Initial Pressure |
N/A 15 N |
F2 - Spring Force Final Pressure |
N/A 34 N |
SW1 |
N/A 22.00 mm |
SW2 |
N/A 1-1/8 in |
Country of Origin |
N/A - |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Plungers & Pin's Guides |
