Monroe
OneMonroe
Locations Throughout the Country
ISO 9001:2015
Tel: (877) 740-2007
Fax: (800) 453-9683
Email: sales@askmonroe.com
Website: monroeengineering.com
Print Back
Japanese Industrial Standard O-Rings are another popular classification system used around the globe. Published by the Japanese Standard Association, these o-rings are also categorized using the metric system. JIS O-Rings are used in many different fields, but typically are implemented in Japan's semiconductor, automotive and machine tool industries. Buna is also known as: Nitrile, NBR, N, Buna-N.

Nitrile, chemically, is a copolymer of butadiene and acrylonitrile. Acrylonitrile content is varied in commercial products from 18% to 48%. As the nitrile content increases, resistance to petroleum base oils and hydrocarbon fuels increases, but low temperature flexibility decreases.

Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -65 to +275°F(-54 to +135°C), nitrile is the most widely used elastomer in the seal industry today.

Inherently nitrile does not possess good resistance to ozone, sunlight or weather, but this can be substantially improved through compounding. For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
Unit of Measure

Specifications

Type

 N/A JIS Standard O-Ring

Material

 N/A Buna

Cross Section Width

 N/A 0.079 in2.00 mm

Durometer

 N/A 90

Inside Diameter

 N/A 45.5 mm1.791 in

CSW Tolerance

 N/A 0.004 in0.09 mm

ID Tolerance

 N/A 0.01 in0.25 mm

JIS Number

 N/A S-46

Warning

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

O-Ring Industries

 N/A O-rings are used in the military defense and agriculture industries.