Print Back

Wave spring washers provide medium loads in a small axial space. This series is split, in other words there is a small gap in the wave circumference. This gap or split allows the ends to move during compression, which if constrained in a bore prevents binding. Common applications for this type of parts is adjacent to ball bearings, where shaft take up or thermal expansion & contraction accommodation is required. The gap or split is advantageous for such applications where the bore is made of softer material than the spring.

Unit of Measure

Specifications

Weight

N/A 0.007073 Pound

Material

N/A High Carbon, C 1060-1075 / SWRH72A

Height

N/A 2.125 Inch

Depth

N/A 0.150 Inch

Width

N/A 0.150 Inch

Application & Uses

N/A Fastening, Pushbutton, Slip Clutch, etc.

Features/Advantages/Benefits

N/A Enables the spring height to be reduced by as much as 50%, fits in tighter axial and radial locations, expands as compression takes place and thus maintains the bore size

Country of Origin

N/A -

Minimum ID (In.)

N/A 1.800 Inch

Maximum OD (In.)

N/A 2.125 Inch

Thickness (In.)

N/A 0.024 Inch

Free Height (Approx) (In.)

N/A 0.150 Inch

Loaded Height (In.)

N/A 0.093 Inch

# of Waves

N/A 4

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.